Behringer MS20 vs MS40

The price difference between Behringer MS20 vs MS40 is relatively small. As the effect, people often wonder whether they should step up from the more affordable MS20 to the slightly more expensive MS40. In fact, these speakers indeed have similar design and features, so the decision depends on how much output power that you actually need.

Continue reading below if you want to find out further about:

  • The design, size, and weight of each model
  • The types of inputs and outputs available on each model
  • The additional features of Behringer MS20 and Behringer MS40
  • The performance of Behringer MS20 vs MS40
  • Which pair of Behringer speakers that is more recommended for you

Design

In a glance, Behringer MS20 and Behringer MS40 look very similar to each other. They both have old-school looks that actually match really well with most studios. They both also have MDF cabinets that are fitted with subtle baffles. For sure, both Behringer MS20 and Behringer MS40 are well-made, robust, and very durable. See also: PreSonus E66 Vs Yamaha HS8

However, they do come with different dimensions. Behringer MS20, unsurprisingly, is smaller. It measures 7.36 inches x 6.06 inches x 9.41 inches, and the weight is about 12.85 lbs. On the other hand, Behringer MS40 is a thud larger, measuring 9.65 inches x 6.81 inches x 10.98 inches and weighing about 17.75 lbs.

Both models here are designed for near-field monitoring. This is often a difficult task for a small studio with limited room. However, Behringer has designed Behringer MS20 and Behringer MS40 to be viable for small studios by placing their bass ports on the front instead of the rear. As you can see, their tweeters are offset slightly in order to make room for the bass ports.

As a result, you can place these speakers closer to the wall without having to worry about destructive low-frequency distortion that may get reflected from the wall. This allows much easier placement.

In addition, Behringer MS20 and Behringer MS40 are magnetically shielded, so you can place these speakers near video monitors without any problem. Without magnetic shielding, a speaker can get distorted by the radio signal that is emitted from a nearby video monitor. But these Behringer speakers can be placed near your computers and display monitors just fine.

Features & Connectivity

As indicated by the differences in their dimensions, Behringer MS20 vs MS40 do come with different woofer and tweeter diameters. On Behringer MS20, you can find a 3.625-inch woofer and a 2.5-inch tweeter. Meanwhile, on Behringer MS40, there is a 4.75-inch woofer and also a 2.5-inch tweeter. The construction materials and designs are similar.

Apart from the drivers, the additional features of Behringer MS20 and Behringer MS40 are similar. Each model comes as a pair, and the left and right speakers are clearly labeled to avoid the confusion. On the main speaker, which is the right one, you can find the power button, a headphone output, and an EQ section which will allow you to configure the bass, treble, and volume levels of Inputs 1 and 2.

Behringer MS20 and Behringer MS40 also have similar connectivity. On the rear panel of the right speaker, you can find two digital input ports, one optical and the other coaxial. There is a switch for selecting the active digital input. The analog section features two input channels; Line 1 is a single stereo 3.5mm TRS input, whereas Line 2 is a pair of RCA connectors. You can use the two analog input channels simultaneously and adjust their volume levels independently.

2011/ 8/ 9 20:07

Finally, there is the output for connecting the left speaker. There is also an AC IN power port. Behringer MS20 and Behringer MS40 are equipped with true 24-bit/192kHz audio converters to ensure the best sound quality and performance.

Included Accessories

Behringer MS20 vs MS40 come with similar items. There isn’t really much to say in this section because they only include the very basics. This is completely understandable, as these are budget models.

After opening the box, you will find either the MS20 or the MS40 speakers encased in styrofoam pads for protection during shipping. There is also the cable for connecting the left and right speakers.

However, some people have complained that the cable is put in a ‘hidden’ location. It is on one of the styrofoam pads, taped to the underside. Some people may even miss it and think that the cable is not included. So, don’t throw the pads and box away before you get the cable!

Then again, the included cable is very thin and light. If you are about to run it through a mass of other cables, you better replace it with a thicker, higher quality cable in order to avoid cross-talk and interference.

The cables for the inputs and outputs are not included. So, although these speakers can easily hook up to a wide range of devices, you need to plan ahead if you don’t have the needed cables yet.

Performance

So, how is the performance of Behringer MS20 vs MS40? In general, both of them sound good. This can be attributed to the high-quality 24-bit/192kHz audio converters, which make these speakers stand out from the competition. But we can confidently say that MS40 speakers sound better than MS20.

Behringer MS20 does have accurate sounds with good clarity. However, the bass and low-mids are a bit lacking. The specs confirm our suspicion; the frequency response range of Behringer MS20 only goes down to 65Hz. The upper limit is 25kHz. As the effect, there is less room for separation. Meanwhile, the upper mids and highs do come out clear and accurate, though a bit dry.

Behringer MS40 sounds a bit better, especially in the bass and low-mids. The frequency response range goes from 50Hz to 25kHz. The speakers can reach lower frequencies, and the larger woofers are beneficial for delivering lows and mids with better definition. The upper mids and highs have very good clarity and transparency. The speakers have no problem in revealing flaws, so monitoring on vocals and strings will be an easy work.

Another difference between these two models is the output power. Behringer MS20 only has a total power of 20 Watts (each speaker outputs 10 Watts), so it is only suitable for small-sized rooms. If you crank the volume up too much, the sound will get distorted. On the other hand, Behringer MS40 has a total power of 40 Watts (each speaker outputs 20 Watts) and won’t have any problem in a medium-sized room.

Warranty

Warranty is an important thing to consider when buying a new speaker. Nobody wants to get a defective product; but in the case that you get one, a good warranty should be able to give you a repair or replacement free of charge. Both Behringer MS20 vs MS40 are backed by excellent warranty coverage – but you need to read the terms and make sure that you follow the instructions in order to be eligible for making warranty claims.

Each product here is backed by Behringer’s 3-year warranty program, which is awesome. Other manufacturers often stick with one-year warranty terms, so the 3-year coverage may indicate Behringer’s confidence in the quality of MS20 and MS40.

That said, keep in mind that you have to register your speakers within 90 days since the purchase date in order to be eligible for the warranty. Make sure that you do get a confirmation email; if not, the registration process is probably failed, and you need to repeat the process. If you face a difficulty, you can contact the customer support for assistance.

Who Should Get These Speakers?

Behringer MS20 and Behringer MS40 are good near-field monitoring speakers that can appeal to many people. Professional musicians and producers who need accurate speakers will get great value from these speakers, which are reasonably priced.

People who simply want to enjoy some good music will also love these speakers. Though monitoring speakers often sound analytical, the on-board EQ will enable you to adjust the sound to suit your liking. The great clarity and detail of these speakers will make you appreciate your favorite songs even more.

Working with electronic keyboards? Behringer MS20 and MS40 are excellent add-on speakers for electronic keyboards. These speakers will also pair very well with computers, as their accurate and detailed sound will make any movie and game sound great. The compact design, magnetic shielding, and front-firing ports will make placement a breeze.

Behringer MS20 and Behringer MS40 are also handy when you are in an event that requires a good speaker, for example an alumni gathering or a church worship. The versatile connectivity will allow you to play audio from pretty much any device.

Behringer MS20 vs MS40

Conclusion

Of these two models, Behringer MS40 is better and more recommended. It can deliver lows and low-mids with better detail and definition. It is also more powerful, and it will be suitable for small and medium-sized rooms. The analog and digital input options make these speakers very versatile, and the on-board EQ is very handy for quick sound adjustments.

Leave a Reply

Your email address will not be published. Required fields are marked *